We offer affordable vinyl and luxury vinyl plank flooring, prefinished flooring,
unfinished flooring, and a broad range of molding, underlayment, and vents.
Choose from a full range of top-quality flooring tools and equipment. We have everything you’ll need to install, finish/refinish, and maintain beautiful hardwood, vinyl, and hybrid floors.
Panel Town & Floors is your one-stop shop for all your flooring supplies. From coatings, abrasives, and adhesives – to filler, putty, and subfloor preparation products – we have the highest-quality products.
This sealer offers rapid drying. It offers maximum safety thanks to no lap marks, even with critical types of wood.
Application on LOBA Stain results in a richer coloration
Excellent coverage rate
Recommended Use
For hardwood floors. Check suitability list for different types of wood.
Recommended conditions are 55°F-80°F/40-75%rH.
Sand and prepare floors according to NWFA guidelines.
WARNING! If you scrape, sand, or remove old paint from wood floors, you may release lead dust. Follow local and/or federal requirements for lead removal. Before you start, find out how to protect yourself and others by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.
ALWAYS PREPARE A SAMPLE OR TEST AREA TO DETERMINE COMPATIBILITY, APPEARANCE, AND DESIRED RESULTS.
Shake material well before use.
Do not thin. Do not add water.
Do not apply at temperatures below 55°F (13°C). Make sure material is at room temperature. Always maintain adequate ventilation during all phases of the coating and drying process.
Apply evenly at the recommended coverage rate. Avoid streaks, puddles, and lap marks.
EasyPrime is applicable on almost every domestic and exotic wood types, only a few rather unfamiliar wood types can cause problems, check suitability list of the primer or consult Loba-Wakol to ensure trouble-free application.
EasyPrime with Amberizer applicable on LOBA Stain give a richer coloration for brown – dark LOBA Stain colors.
Application Tool
LOBA roller Microfiber 100-120T-barTrim padLambswoolBrushRoller
Coverage
400-500 square feet per gallon per coat.
Drying time
1 hour minimum.
Must be recoated within 24 h.
If there is a delay in drying wait until you can see that the surface is completely dry.
Recommended Procedure for Wood Floors
Prepare surface and apply EasyPrime.
Drying: 1 hour minimum
Apply LOBA water-based finish or LOBA UV Rush finish onto surface. Refer to the Technical Data Sheet of the finish
Suitable product combinations
Suitable Finishes:
All LOBA and LOBA finishes refer to the Technical Data Sheets for the product.
Screen and Recoat
Do NOT use EasyPrime on Factory Finished or Manually Finished Floors.
Only apply to raw wood and LOBA Stain.
EasyPrime must be coated with approved LOBA water-based finishes.
Compatibility
When this product is used in combination with other LOBA products the technical information of these products must be followed. Refer to the Technical Data Sheets. LOBA cannot guarantee the suitability of products other than LOBA.
General Guidelines
Cleaning of tools:Â Clean tools and equipment with water.
Cure Time: The stated drying and cure times are based on ideal conditions (68°F, 50% rH) at the recommended application rates. Insufficient ventilation, high humidity, lower temperatures, increased coat thickness can prolong the curing process considerably. Do not cover floors, replace carpets or rugs, or clean floors with a damp mop/cloth before the final curing has been reached.
Use with or without a primer:Â Some finishes can be used without a primer. The use of a primer increases application reliability and decreases risk of application marks on most wood types. Further details can be found in the LOBA wood type suitability list in the current catalog.
Side bonding:Â Water-based coating systems can show a tendency for side bonding. Several measures can be taken to minimize the formation of irregular joints and the associated locking effect. The use of shear-resistant or firm elastic adhesive to adhere the hardwood flooring, careful filling of the joints, use of suitable LOBA primers, and maintaining a consistent climate are some of these steps. (Education of the customer is recommended). The risk of side bonding is greater with old floors with damaged, weak, or very flexible adhesives and wood flooring installed over underfloor heating, and less stable woods such as beech and maple.
Safety Precautions:Â Even when working with low or zero-emission products the usual safety measures must be taken. Keep away from children. Do not eat, drink, or smoke in working areas. Wear suitable safety gloves. Clean product off of hands. Change soiled clothes.
First Aid:Â If swallowed, do not induce vomiting. Call for medical help immediately. Never give anything by mouth to an unconscious person. If breathing is difficult or other respiratory complaints, remove to fresh air and get medical attention. In case of eye contact, immediately flush eyes for several minutes under running water. Generally, this product does not cause skin irritation. Call a physician if irritation occurs.
There are no reviews yet.