Home
$
Supplies

Flooring Supplies

From subfloor preparation to final finish, get the best flooring supplies for any stage of your project.

Shop supplies for hardwood, vinyl, laminate, and waterproof wood flooring installation, along with the essentials to keep them clean, protected, and performing over time.

Get expert-backed products selected for performance on the jobsite.

Find your supplies today, place your order, and keep the job moving.

Subfloor Preparation

Frequently Asked Questions about Flooring Supplies

We know you may have questions about flooring supplies. That’s why we have gathered and answered a few of the most common questions we hear about our flooring supplies.

Do I need a moisture barrier for my flooring project?

You need a moisture barrier when you install over concrete or any surface that holds moisture. Concrete releases vapor over time, and that moisture can damage wood, laminate, or adhesives. Use a polyethylene vapor barrier or an underlayment with built-in moisture protection to block it. For glue-down installs, use a moisture control system or adhesive rated for moisture.

What is the difference between a sealer and floor finish?

A sealer prepares the surface and controls how the wood absorbs the coating. It helps the finish bond evenly and prevents blotching. A floor finish sits on top and takes the wear. It sets the durability and sheen. Use a sanding sealer or wood sealer first when required, then apply a polyurethane or water-based floor finish for protection.

What underlayment do I need for my flooring?

Match the underlayment to the flooring type and subfloor. Floating floors like laminate and many vinyl products rely on foam or rubber underlayment for support and sound control. Over concrete, use underlayment with a vapor barrier attached. If the flooring includes a pre-attached pad, skip the extra layer unless the manufacturer calls for it.

How much flooring adhesive do I need?

Check the coverage rate on the adhesive and follow the recommended trowel size. Both control how far it spreads. Urethane and acrylic flooring adhesives each have different coverage ranges. Rough or porous subfloors use more product, so plan for extra. If you run short, you risk bond failure and delays.

How long should I wait before using or cleaning new floors?

Follow the cure time for the adhesive or finish, not just the dry time. Most polyurethane and water-based finishes allow light traffic within 24 hours but need several days to fully cure. Avoid cleaners and heavy use until the surface sets. Early traffic or cleaning can damage the finish or weaken the bond.

What our customers are saying:

The Panel Town Blog

Read the Panel Town blog to learn everything you need to know about flooring.

SEE ALL ARTICLES

DIY Wood Floor Refinishing: The Setup for a Professional Finish

Most DIY floors look fine until the finish goes down. We talk to DIYers all the time who are about to apply finish. I spoke with our Flooring Specialist, Dane Rindler, about what he recommends. Customers regularly call in and work directly with him to get their setup...

Loba-Wakol Connected Systems Training at Panel Town

Do you prep, install, and finish floors? Join Loba-Wakol and Panel Town & Floors for a 3-day , hands-on training focused on systems, application, and real-world practice.Event Details Dates: May 5th - May 7thTime: 8:00 AM - 4:00 PM (each day)Cost: $175 per person...

LVP vs Laminate: Which Floor is Right for You?

You use your floor more than anything in your home other than your bathroom. Your floor takes you from point A to point B to point C every day. Because different floors tolerate different behaviors, the real question becomes: how are you going to live on it? That’s...

Sign Up For Exclusive
Flooring Deals

Sign up for our e-newsletter and get 5% off your next online order.

Subscribe Now