Titebond 100% Silicone Sealant Clear

Features & Benefits

• Ideal For: General Construction, Remodeling and Repair Projects.
• Seals: Vinyl, Aluminum, Glass, Marble, Granite, Painted Surfaces and Most Common Building Materials.
• Premium Multi-Purpose Applications
• NSF 51 Certified for Direct Food Contact
• Non-Staining Versatile Formula
• Withstands Extreme Temperature Changes
• Will Not Crack or Become Brittle
• No Shrinkage or Discoloration
• Watertight Seal

Application Guidelines

• Application Temperature: Above -40°F (-40°C)
• Service Temperature Range: -60°F to 350°F (-51°C to 177°C)
• Method Of Application: Cartridge/caulking gun
• Working Time: Approximately 15-20 minutes for a 1/4″ bead
• Application Directions: 1. Surfaces must be clean and free of any material that may prevent adequate adhesion. Properly designed joint not to exceed 1/2″ in width. 2. Remove nozzle, cut tip of the nub and puncture inner foil seal. 3. Screw nozzle onto cartridge and cut tip on slant for 1/4″ to 3/8″ bead and place in cartridge gun. 4. Force sealant into clean joint. If necessary, smooth bead immediately. It is the sole responsibility of the user to thoroughly test any proposed use with all substrates to determine project suitability.
• Cleanup: Clean uncured material with mineral spirits or equivalent solvent. After curing, excess sealant must be cut or scraped away. Follow solvent vendor’s precautions when using solvents.
• Coverage:
  • 10.1 oz. Cartridge
    • 1/8” Bead: 123 ft.
    • 1/4″ Bead: 31 ft.
    • 3/8″ Bead: 14 ft.
    • 1/2″ Bead: 8 ft.
• Limitations: Not designed for continuous submersion or use below the waterline. Do not apply if rain is expected within 12 hours. This product should not be painted. Not recommended for alkaline substrates. For best results, store in a dry location at or below 75°F.

Physical Properties

• Type: Silicone
• Calculated Voc: 50 g/L (3%)
• Color: Clear, white and colors
• Solids: 100%
• Flashpoint: 200°F
• Viscosity: 250,000 cps
• Freeze / Thaw Stability: Stable
• Storage Life: 24 months in a dry location at or below 75°F

Specifications

• Exceeds:
  • ASTM C920
  • Federal Specification TT-S-00230C
  • TT-S-001543A
  • When fully cured, meets FDA regulation 21-CFR-177.2600.
  • NSF 51 Certified for direct food contact.

Warranty Statement

50 Year Limited Warranty: If not satisfied with product performance when used as directed, return container and proof of purchase to Franklin International, Inc. for replacement of product. Liability is limited to product replacement only.

SDS

• Clear 2611

TDS

• Clear 2611