Sheoga Unfinished White Oak – Clear Grade – Solid Hardwood 3/4″ x 5-1/4″

$12.69 / sq. ft. $12.69 / sq. ft.266.49

Sheoga Clear White Oak in Natural is high-end flooring known for its unsurpassed craftsmanship.

4-Sided Micro-Beveled Edge
30 Sheen Solid-Based Ceramic Urethane Finish
Clear grade

Minimum order quantity is 105 sq. ft.
Special Order: 3-21 Days

Length

Width

Size Of Your Project:

Quantity of boxes

SKU: WFPRFISG-205.003 Categories: Brands, Flooring, Hardwood Flooring, Oak, Sheoga Hardwood Flooring, Species, Unfinished Hardwood, White Oak

PRODUCT DESCRIPTION

Appearance/Color: The heartwood can vary from light, to medium brown, to pale yellowish brown or dark pale brown, commonly with an olive cast. White to light brown sapwood isn’t always demarcated from the heartwood. White oak can have a broad range in color variation.

Photosensitivity: Low. Lightens with age and exposure to sunlight and oxygen. GRAIN: Ring-porous. Grain is straight, open, and medium to coarse in texture.

Hardness (Janka): Averages 1360 lbf

Average Dried Weight: 3.91 lbs. per sq. ft.

Specific Gravity: Averages 0.68 (at 12% MC)

Dimensional Stability In-Use: Below average.

Installation: Cuts, routs, planes, and shapes well, with a moderate dulling on cutting edges. Responds well to bending. No known concerns with nailing when the compressor psi is set appropriately. Glue adheres well, with no known issues.

Sand/Finish: Sands satisfactorily when following the standard grit progression sequence. Accepts stains and finishes very nicely, with no known concerns. Tannic acid, very prominent in white oak, can react with some liquids. This often is used intentionally to create unique customized effects, but also can cause unintentional consequences with some types of finishes.

Clear Grading Rules: Natural heartwood color variations and a small amount of contrasting sapwood, along with allowable natural wood characters. Will admit the following: Limited light-colored pin knots 1/8’’ in diameter, small burls, and thin brown streaks. 3/8’’ wide bright sapwood entire length of the piece or equivalent, if not more than 1’’ wide for 1/3 the length of the piece. The back side will admit: Occasional scant thickness and or waney edge if piece has sufficient bearing of full thickness to support it to the floor.